HydroPlus® CE software integrates a
Windows® CE devices, a multiparameter probe, and a GPS receiver for collecting
data in the field. Record both water quality parameters and GPS location with
the click of button.
Features Include:
Interface hand held to In-Situ 9000/9500, YSI 6 Series, or Hydrolab 4a/5
Series Multiprobes
Direct communication with multiprobe for configuration, calibration, and
data retrieval.
Optional GPS feature for position tagging water quality data and navigating
to sampling locations.
Continual readout of position and water quality data.
Log position and water quality data with a click of a button.
The Timed Log feature allows data to be recorded at a preset interval.
Set up Location/Site information complete with GPS coordinates.
Dynamically resizes fonts to keep font size as large as possible, based on
number of parameters selected and whether GPS is used.
Display up to 30 parameters on screen at a time.
Shows data in multiple units of measurement.
Grab Sample, User Notes and Field Sample Notes accommodated.
Color indication of whether a parameter is stable or not. Stabilization
parameters are user definable.
Graph real-time data or historical data. Display up to three parameters on
the display at a time.
For In-Situ Probes:
User can save View and Logging setups on a per-probe basis. Saves time by
not having to redefine settings each time.
Calibration reports are automatically generated with each calibration.
User can record calibration notes specific to probe, calibration type,
calibration standard information, etc.
Pre-calibration and post-calibration readings are stored in calibration
report.
User has choice of waiting for “Nominal” or “Stable” status while
calibrating. User can specify how many readings are required for either
classification.
HydroPlus Host PC Software
Overlays Microsoft ActiveSync software for a user friendly interface for
file transfers.
Converts data to ASCII text, .csv, .mdb, or .dbf formats. Flat-file
conversion for Excel. Use data with ArcGIS.
Automates transfer and conversion processes. Simply plug the cable in and
HydroPlus Host takes over from there.
HydroPlus Table Editor PC Software
Edit .dbf tables that contain location & waypoint information.
Edit HydroPlus header or data log files.
Compatible Systems:
Desktop PC
Processor: 486 or higher
Operating System: Microsoft Windows 95, 98, Me, NT, 2000, or XP
RAM: 32 MB or Greater
Communication Port: USB cradle, IR port, or RS232 serial port with Microsoft
ActiveSync connection
 Windows CE Device
Processor: Intel StrongARM compatible,
Operating System: Microsoft Windows CE CE.net 4.x, Windows Mobile 2003, 2003
Second Edition or Windows Mobile 5. (Older HydroPlus version available for CE
3.x & PocketPC 2002.)
Memory: 16 MB RAM (32 or greater recommended)
Desktop Software: Latest version of Microsoft ActiveSync recommended; v4.x
required for Windows Mobile 5
These Windows CE devices have been tested with HydroPlus CE:
In-Situ Rugged Reader
TDS/Trimble Ranger and Recon
Trimble GeoExplorer CE
Juniper Systems Allegro and Archer. 
Tested Multiprobes
HydroPlus CE has been tested with the following
multiprobes.
In-Situ MP-TROLL 9500, 9000 and miniTROLL probes
Hydrolab Series 4a/5 MiniSonde® or DataSonde® in ANSI mode.
YSI 6 Series
Either internal battery option or external battery pack is required.
GPS Receivers
Compatible GPS receivers that support any of the following
GPS protocols:
NMEA (National Maritime Electronics Association) 0183
TSIP (Trimble’s binary protocol)
If your system isn't listed, we'll test compatibility before you purchase.
HydroPlus® CE Data Sheet
Using HydroPlus® CE Data
with ArcGIS 9.x
HydroPlus CE -
Demonstration Software Download.
In-Situ MP-TROLL Water
Quality Probe
GPS Rugged Reader
Bundles plus Other Application Software for Water Resource Applications
DataSight - Data Management,
Graphing and Analysis Software
Trimble Mapping Receivers
ESRI ArcPad Software
|
|
